INDUSTRIAL DEGREASING SOLVENT
OPTIMISED FLASHPOINT/EVAPORATION SPEED RATIO
NOT CLASSIFIED FLAMMABLE CLP CE 1272 GHS REGULATIONS
DIELECTRIC, BREAKDOWN VOLTAGE IEC 156 63,000 volts
FOR CLEANING AND MOIST DECONTAMINATION OPERATIONS
DEGREASING SOLVENT FOR DEGREASING PARTS WASHERS
INDUSTRIAL MAINTENANCE AND GENERAL MECHANICS DEGREASING
ELIMINATION OF WET INKS FOR FLEXOGRAPHY-HELIOGRAPHY
Mix of narrow cut hydrocarbons producing a fast evaporation speed for a maximum flashpoint. Hydrotreated by catalysis, NEUTRALÈNE® ECO 60 is entirely free of aromatics and benzene.
This product is intended for degreasing operations in mechanical applications and industrial maintenance, but its significant neutrality in relation to plastics means that it can be used in many other fields. Degreasing solvent for parts washers.
|
FLASHPOINT 66°C NF EN ISO 2719 CLP CE 1272/2008 SGH EU Regulation 2015/1221
EVAPORATION SPEED 35min
DEGREASING POWER 32 (Kauri Butanol index ASTM D 1133)
|
Drum 200 L
|
NEUTRALENE ECO 60 is available with ULTRA-STRONG solvent power
KAURI BURANOL INDEX 120
under the iBiotec NEUTRALENE RS 60 reference
APPLICATIONS
Cleaning and degreasing mechanical components, bearings, rollers, slides, racks, power transmissions and information transmissions.
Clean-up of tagged-out electrical devices.
Industrial maintenance.
Cleaning operating in assembly workshops.
Degreasing operation in solvent parts washers.
Removal of wet inks in flexography and heliography printing.
|
|
|
|
Degreasing of mechanical components |
Cleaning inks from flexography cylinders |
INSTRUCTIONS FOR USE
Use undiluted.
Elimination with mechanical action, rag, paintbrush, brush, low-pressure sprayer.
Degreasing parts washers.
Do not use in ultrasonic bins.
Usage precautions: in order to remain in optimum safety conditions, we advise working at 15 at 20°C below the product flash-point.
PHYSICO-CHEMICAL PROPERTIES
|
PROPERTIES |
STANDARDS |
VALUES ECO 60 |
VALUES RS 60 |
UNITS |
|
Appearance |
Visual |
Clear |
Clear |
- |
|
Colour* |
Visual |
Colourless |
Colourless |
- |
|
Odour |
Olfactory |
Slight |
Slight |
- |
|
Density at 25°C |
NF EN ISO 12185 |
805 |
815 |
kg/m3 |
|
Refraction index |
ISO 5661 |
1.4410 |
1.4350 |
- |
|
Freezing point |
ISO 3016 |
-50 |
-50 |
F |
|
Water solubility |
- |
Insoluble |
Insoluble |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
1.8 |
1.4 |
mm²/s |
|
Acid index |
EN 14104 |
0 |
0 |
mg(KOH)/g |
|
Iodine index |
NF EN 14111 |
0 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
0.005 |
0.005 |
% |
|
Residue after evaporation |
NF T 30-084 |
0 |
0 |
% |
|
PERFORMANCE CHARACTERISTICS |
||||
|
PROPERTIES |
STANDARDS |
VALUES ECO 60 |
VALUES RS 60 |
UNITS |
|
Kauri Butanol index |
ASTM D 1133 |
32 |
120 |
- |
|
Evaporation speed |
- |
35 |
36 |
min. |
|
Surface tension at 20°C |
ISO 6295 |
23.6 |
23.4 |
dyne/cm |
|
Breakdown voltage |
NF EN 60156/IEC 156 |
63,000 |
60,000 |
Volts |
|
Copper blade corrosion 100 h at 40°C |
ISO 2160 |
1a |
1a |
Measured value |
|
FIRE SAFETY CHARACTERISTICS |
||||
|
PROPERTIES |
STANDARDS |
VALUES ECO 60 |
VALUES RS 60 |
UNITS |
|
Flashpoint (closed cup) |
ISO 2719 |
66 |
63 |
F |
|
Autoignition point |
ASTM E 659 |
> 230 |
> 230 |
F |
|
Lower Explosive Limit |
NF EN 1839 |
0.6 |
0.7 |
% (volume) |
|
Upper Explosive Limit |
NF EN 1839 |
7.0 |
7.0 |
% (volume) |
|
Explosive, oxidising agent, flammable, highly or extremely flammable substance content |
GHS Regulation |
0 |
0 |
% |
|
TOXICOLOGICAL CHARACTERISTICS |
||||
|
PROPERTIES |
STANDARDS |
VALUES ECO 60 |
VALUES RS 60 |
UNITS |
|
Anisidine index |
NF ISO 6885 |
nm |
nm |
- |
|
Peroxide index |
NF ISO 3960 |
nm |
nm |
meq(O2)/kg |
|
TOTOX (anisidine index+2x peroxide index) |
- |
nm |
nm |
- |
|
CMR, irritant and corrosive substance content |
GHS Regulation |
0 |
0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
0 |
% |
|
Emissions of hazardous compounds, CMR, irritants, corrosive at 160°C |
GC-MS |
0 |
0 |
% |
|
ENVIRONMENTAL CHARACTERISTICS |
||||
|
PROPERTIES |
STANDARDS |
VALUES ECO 60 |
VALUES RS 60 |
UNITS |
|
Biodegradability |
OECD 301 |
easily biodegradable |
easily biodegradable |
- |
|
Steam pressure at 20°C |
- |
0.38 |
0.38 |
hPa |
|
VOC content (Volatile Organic Compounds) |
- |
100 |
100 |
% |
|
Sulphur content |
GC MS |
0 |
0 |
% |
|
Benzene content |
ASTM D6229 |
0 |
0 |
% |
|
Total halogen content |
GC MS |
0 |
0 |
% |
|
Chlorinated solvent content |
- |
0.00 |
0.00 |
% |
|
Aromatic solvent content |
- |
0.00 |
0.00 |
% |
|
Environmentally-hazardous substance content |
GHS Regulation |
0 |
0 |
% |
|
Content of compounds with GWP |
- |
0 |
0 |
% |
|
Content of compounds with ODP |
- |
0 |
0 |
% |
|
Carbon assessment, life cycles analysis. |
ISO 14040 |
nm |
nm |
Kg carbon equivalent |
* not measured or not measurable
PRESENTATIONS
|
IBC GRV 1000 L
|
Drum 200 L
|
Bidon 20 L
|
INSTRUCTIONS FOR USE
 |
|
| Degreasing with rag |
Degreasing with brush |
 |
|
| Solvent parts washers | Hot or cold immersion tanks |
 |
|
| Rotating or forward-travelling basket |
A3 washing machines |
Looking for another product?
|
Discover our entire range by clicking on the photo |
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 